500 Mount Series Dimensions
500 MOUNT SERIES SNUBBING WASHER
The use of snubbing washers is recommended to ensure proper static and dynamic loading of the isolator and retention of suspended equipment under severe shock environments.
Snubbing washers are ordered by separate part numbers as shown in the table below. The standard material is low-carbon steel and the standard finish is zinc plate. Other materials and finishes are available upon request. Contact BPG,Inc. 1-800-422-3BPG (3274)
| Size |
"A" Dia. |
"B" Dia. |
"C" |
Part# |
| 505 |
1.63 |
.322 |
.093 |
R18733-6 |
| 506 |
1.75 |
.385 |
.093 |
R18733-7 |
| 507 |
2.00 |
.450 |
.125 |
R18733-1 |
| 508 |
2.00 |
.510 |
.125 |
R18733-2 |
| 510 |
2.25 |
.635 |
.150 |
R18733-3 |
| 512 |
2.50 |
.780 |
.188 |
R18733-4 |
| 516 |
3.25 |
1.010 |
.250 |
R18733-5 |
