| HIGH CAPACITY MINI RELAYS | |||||||
|---|---|---|---|---|---|---|---|
| Part Number | Description and details # 4 terminal relay | Illustration and Dimensions Drawing | Terminal Diagram Circuit Diagram | Voltage Operating Voltage Nominal-Max. | Contact Material | Maximum N.O. Resistive Load Amps-Life Cycles | Other Loads See Group# in Load Table |
| 0 332 019 103 | SPST, resistor, # | (1) | A3 S7 | 12V - 15V | STO | 50A - 150,000 | 1 |
| 0 332 019 110 | SPST, resistor, bracket # | (2) | A3 S7 | 12V - 15V | STO | 50A - 150,000 | 1 |
| 0 332 209 137 | SPDT, resistor | (1) | A2 S5 | 12V - 15V | STO | 50A - 150,000 | 2 |
| 0 332 209 138 | SPDT, resistor, bracket | (2) | A2 S5 | 12V - 15V | STO | 50A - 150,000 | 2 |
| 0 332 019 203 | SPST, bracket | (2) | A1 S1 | 24V - 30V | STO | 20A - 250,000 | 3 |
| 0 332 209 203 | SPDT, bracket | (2) | A2 S4 | 24V - 30V | STO | 20A - 250,000 | 4 |
| 0 332 209 204 | SPDT, diode P | (1) | A2 S6 | 24V - 30V | STO | 20A - 250,000 | 4 |
| 0 332 209 211 | SPDT | (1) | A2 S4 | 12V - 15V | STO | 20A - 250,000 | 4 |
| All are dust proof; all 12V relays have a resistor in parallel to the coil to limit EMI. P=plated terminal | |||||||
| HIGH CAPACITY MINI RELAYS | |||||
|---|---|---|---|---|---|
| Part Number | Pull-In Voltage | Drop-out Voltage | Resistance | Nominal Operating Current | |
| No resistor or with diode | With resistor | ||||
| 0 332 019 103 | ²8.0V | 1.2 - 5.0V | 75 ± 5 ohm | 160mA | |
| 0 332 019 110 | ² 8.0V | 1.2 - 5.0V | 75 ± 5 ohm | 160mA | |
| 0 332 019 137 | ² 8.0V | 1.2 - 5.0V | 75 ± 5 ohm | 160mA | |
| 0 332 019 138 | ² 8.0V | 1.2 - 5.0V | 75 ± 5 ohm | 160mA | |
| 0 332 019 203 | ² 16.0V | 2.4 - 10.0V | 255 ± 15 ohm | 95mA | |
| 0 332 209 203 | ² 16.0V | 2.4 - 10.0V | 255 ± 15 ohm | 95mA | |
| 0 332 209 204 | ² 16.0V | 2.4 - 10.0V | 255 ± 15 ohm | 95mA | |
| 0 332 209 211 | ² 16.0V | 2.4 - 10.0V | 255 ± 15 ohm | 95mA | |
| LOAD AND LIFE CYCLE TEST DATA FOR HIGH CAPACITY MINI RELAYS | ||||
|---|---|---|---|---|
| Contact testing conditions | Test Temp. | Relay Type | Load | Switching Cycle |
| For STO (Silver Tin Oxide) contacts: Life cycles tested at 85 degrees C, 13.5V (27V for 24V relays) | 85 degrees C | High Capacity | Lamp resistive motor | 1 Sec ON, 9 Sec OFF 2 Sec ON, 2 Sec OFF, 5 Sec ON, 5 Sec OFF |
| HIGH CAPACITY MINI RELAY LOAD TABLE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Load Group | Voltage | Contact Position | Resistive Load | Motor Load | Lamp Load | Inductive Load | ||||
| Continuous | Life Cycles | In rush/Continuous | Life Cycles | Continuous | Life Cycles | Continuous/ Inductivity |
Life Cycles | |||
| 1 | 12V | NO | 50A | 150,000 | 90/40A | 150,000 | 30A | 150,000 | N/A | N/A |
| 40A | 250,000 | 5/30A | 250,000 | 20A | 250,000 | |||||
| 30A | 500,000 | 50/20A | 300,000 | 10A | 500,000 | |||||
| HIGH CAPACITY MINI RELAYS - CHARACTERISTICS | ||
|---|---|---|
| Operating Characteristics | Mechanical Characteristics | Environmental Characteristics |
| Response Time < 10mS | Random Vibration Test 10Hz - 1000Hz for 4 h | Operating Temperature -40°C to + 85°C |
| Response Time,with Diode < 15mS | Sine Wave Vibration Test 10Hz - 200Hz, 2.5G's for 4 h | Humidity Test 95% for 7 days |
| Contact Voltage Drop - New, at 10A < 50mV | Drop Test - All Sides 1 meter | Salt Spray Test - All Sides 144 hours |
| Response Time < 10mS | Terminal Retention Force > 110N | Dust Test 8 hours |
| (12V, at 10A) - After life test < 80mV | Cover Retention Force > 220 N | |
| Mechanical Life >1,000,000 | Cover Crush Force >220 N | |
| Coil Inductance <250mH | ||
| 440 Industrial Drive North Wales, PA 19454-4151 800.422.3274 215.699.0940 Fax 215.699.0944 |
