LOW PROFILE MOUNTS: 6300/6500 Series

Small, low-profile, all-attitude elastomeric mounts for vibration and shock protection.
Barry 6300/6550 Series Mounts are designed for use either as an integral mount or isolation system for light to medium weight electronic equipment. Versions are available in Neoprene or Hi-Damp Silicone for MIL specifications.

Natural Frequency	15-40 Hertz (6300) 20-40 Hertz (6550)
Transmissibility at Resonance	4.0 Max. (Hi-Damp Silicone) 10.0 Max. (Neoprene)
Resilient Element	Hi-Damp Silicone or Neoprene
Standard Materials	varies with model
Weight	6300 = 1.0 oz. 6550 = 1.0 oz.

Dimensions and Performance Characteristics
6300 \| 6550

Applications

Airborne electronics and racking
Ruggedized disk drives
Electronic chassis
Electric motors

Features

All attitude
Low-cost
Axial to radial stiffness of 1:1
Compact, low-profile design

Features

Compact, low-profile design
Available in two sizes
High deflection capability and compact size for light loads
Axial to radial stiffness ratio 2:1

Benefits

Compact size minimizes required mounting space
Mounting permitted at any angle
Fail-safe design captivates equipment even if elastomer is destroyed

Load Range

6300 = 4 load ratings to 11 lbs. per mount
6550 = 4 load ratings to 18 lbs. per mount

Environmental Data

Hi-Damp Silicone is ideal for applications requiring greater damping, extreme temperature service and resistance to fungus and ozone. Operating temperature range is -67ºF to +300ºF (-55ºC to +150ºC).
Neoprene operating temperature range is -20ºF to +180ºF (-30ºC to +83ºC) and is resistant to oil and ozone.

440 Industrial Drive • North Wales, PA 19454-4151
Call 1.800.422.3274 • Fax 1.215.699.0944