MECHANICAL COMPONENTS: Fixture Studs

Fixture Studs
Vlier Studs offer tensile strength of 125,000 min. PSI. Brinell : 225. Yield: 100,000 min. PSI. Elongation: 10% in 2. Machinability is 80% of B-1112. Rockwell: 25C.

Stud -Thread Size
Length L	1/4-20 Part No.	5/16-18 Part No.	3/8-16 Part No.	1/2-13 Part No.	5/8-11 Part No.	3/4-10 Part No.	7/8-9 Part No.	1-8 Part No.
Stud - Standard Sizes
	A 1	A 1-1/8	A 1-1/4	A 1-1/2	A 1-3/4	A 2	A 2-1/4	A 2-1/2
1-1/2	9450	9460	9408	9412	9515	Parts Within Shaded Area See Note
2	9451	9461	9409	9413	9517
2-1/2	9452	9462	9474	9486	9503
3	9453	9463	9475	9487	9504	9523	9403	-
3-1/2	9454	9464	9476	9488	9505	9524	-	-
4	9455	9465	9477	9489	9506	9525	9543	9560
4-1/2	-	9466	9478	9490	9507	9526	-	-
5	-	9467	9479	9491	9508	9527	9545	9562
5-1/2	-	-	9480	9492	9509	9528	-	-
6	-	9469	9481	9493	9510	9529	9547	9564
6-1/2	-	-	9482	9494	9511	9530	-	-
7	-	9471	9483	9495	9512	9531	9549	9566
7-1/2	-	-	9484	9496	9513	9532	-	-
8	-	9473	9485	9497	9514	9533	9551	9568
9	-	-	-	9499	9516	9535	9553	9570
10	-	-	-	9501	9518	9537	9555	9572
12	-	-	-	9440	9522	9541	9559	9576
14	-	-	-	9441	9502	9442	9404	9436
16	-	-	-	-	-	9443	9405	9437
18	-	-	-	-	-	9444	9406	9438
20	-	-	-	-	-	9445	9407	9439
NOTE: Studs too short for given thread lengths, are threaded as close to center as practical.

440 Industrial Drive • North Wales, PA 19454-4151 • 800.422.3274 • 215.699.0940 • Fax 215.699.0944