Delrin Knob Locking Delrin Knob SS Non-Locking Delrin Knob SS Locking Knurled Knob Locking Hex Drive T-Handle Pull Ring Pull Ring Stubby Lever Type Locking Lever Type Non-Locking Lever Type Stubby
Locking Pins - T-Handles Locking Pins - Button Handles
ALL PRODUCT INDEX
Delrin® Knurled Knob Steel Retractables/Non-Locking
Vlier Knurled Knob Steel/Non-Locking Plungers provide a retractable plunger that can be easily withdrawn and reengaged. Large hardened bearing surfaces permit greater side loading. Slight end taper for easy alignment. Tough steel body and spring. Zinc gold chromate finish.
Delrin® Knurled Knob Stainless Steel Retractables/Non-Locking
Vlier Knurled Knob Stainless Steel/Non-Locking Plungers offer the added benefit of an all-stainless steel design for maximum protection against rust and corrosion.
| Knurled Knob - Steel/Stainless Steel (Non-Locking) ANSI Threads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D* | E | F | G | ||
| Steel | Stainless Steel | Init. | Final | |||||||
| SL190 | SSL190 | 0.50 | 3.0 | 10-32 | .400 | .094 | .104** | 0.38 | .250 | .19 |
| SL250 | SSL250 | 1.00 | 4.0 | 1/4-20 | .500 | .125 | .123 | 0.50 | .313 | .019 |
| SL312 | SSL312 | 1.00 | 6.0 | 5/6-18 | .625 | .188 | .154 | 0.63 | .375 | .25 |
| SL375 | SSL375 | 1.00 | 8.0 | 3/8-16 | .750 | .218 | .185 | 0.75 | .500 | .31 |
| SL500 | SSL500 | 1.00 | 10.0 | 1/2-13 | .875 | .250 | .248 | 1.00 | .625 | .38 |
| *TOLERANCE: - +.001; -.0254 (+.000; -.001) **190 SERIES HAS A RADIUSED NOSE | ||||||||||
| Knurled Knob - Steel/Stainless Steel (Non-Locking) Metric Threads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D* | E | F | G | ||
| Steel | Stainless Steel | Init. | Final | |||||||
| SLM5 | SSLM5 |
2.22 (0.5) |
13.34 (3.0) |
M5 X 0.8 |
10 (.394) |
2 (.078) |
2,5 (.0984) |
9 (.355) |
6 (.236) |
4 (.157) |
| SLM6 | SSLM6 |
4.45 (1.0) |
17.8 (4.0) |
M5 X 0.8 |
13 (.512) |
3 (.118) |
3 (.118) |
13 (.512) |
8 (.315) |
5 (.197) |
| SLM10 | SSLM10 |
4.45 (1.0) |
35.6 (8.0) |
M10 X 1.5 |
19 (.748) |
6 (.236) |
5 (.1968) |
19 (.748) |
13 (.512) |
8 (.315) |
| SLM12 | SSLM12 |
4.45 (1.0) |
44.5 (10.0) |
M12 X 1.75 |
23 (.905) |
6 (.236) |
6 (.236) |
25 (.984) |
16 (.630) |
10 (.315) |
| *TOLERANCE: - +.001; -.0254 (+.000; -.001) **190 SERIES HAS A RADIUSED NOSE | ||||||||||
| 440 Industrial Drive • North Wales, PA 19454-4151 • 800.422.3274 • 215.699.0940 • Fax 215.699.0944 |
