Delrin Knob Locking Delrin Knob SS Non-Locking Delrin Knob SS Locking Knurled Knob Non-Locking Knurled Knob Locking Hex Drive T Handle Pull Ring Pull Ring Stubby Lever Type Non-Locking Lever Type Stubby
Locking Pins - T-Handles Locking Pins - Button Handles
ALL PRODUCT INDEX
Lever Type Steel Retractable Plungers
Vlier Lever Type Steel Locking Plungers permit the plunger tip to be fully withdrwan into the body. Fully retracted plunger locks into retracted position.
Lever Type Stainless Steel Retractable Plungers
Vlier Lever Type Stainless Steel Locking Retractable Plungers provide the added advantage of an all stainless steel design for maximum protection against rust and corrosion.
| Lever Type - Steel/Stainless Steel (Locking) ANSI Threads | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | E Hex |
F | G | H | I | ||
| Steel | Stainless | Init. | Final | |||||||||
| FR250 | SSFR250 | 0.50 | 2.50 | 1/4-20 | 1.25 | 0.38 | .16 | .25 | 0.50 | .09 | 0.80 | * |
| FR375 | SSFR375 | 0.75 | 3.75 | 3/8-16 | 2.00 | 0.56 | .25 | .38 | 0.75 | .14 | 1.31 | .13 |
| FR500 | SSFR500 | 1.00 | 5.0 | 1/2-13 | 2.11 | 0.75 | .31 | .50 | 0.93 | .19 | 1.25 | .15 |
| FR625 | SSFR625 | 1.00 | 5.0 | 5/8-11 | 3.05 | 1.00 | .38 | .62 | 1.00 | .19 | 2.00 | .18 |
| To Order with Locking Element - Add "P" at end of the part number. * NO THREAD RELIEF FOR 1/4-20 SERIES. |
||||||||||||
| Lever Type - Steel/Stainless Steel (Locking) Metric Threads | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | E Hex |
F | G | H | I | ||
| Steel | Stainless | Init. | Final | |||||||||
| FRM6 | SFRM6 | 2,2 (.50) |
11,1 (2,5) |
M6 X 1.0 | 32 (1.26) |
10 (.39) |
4 (.157) |
6 (.236) |
12,7 (.50) |
2,3 (.09) |
20 (.788) |
* |
| FRM10 | SFRM10 | 3,3 (.75) |
16,7 (3.75) |
M10 X 1.5 | 51 (2) |
14 (.55) |
6 (.236) |
10 (.39) |
19 (.75) |
3,5 (.14) |
33 (1.3) |
3,3 (.13) |
| FRM12 | SFRM12 | 4,5 (1.0) |
22,3 (5.0) |
M12 X 1.75 | 54 (2.1) |
19 (.75) |
7 (.275) |
12 (.47) |
25,4 (1.0) |
4,8 (.19) |
32 (1.26) |
3,8 (.15) |
| To Order with Locking Element - Add "P" at end of the part number. * NO THREAD RELIEF FOR M6 SERIES. |
||||||||||||
| 440 Industrial Drive • North Wales, PA 19454-4151 • 800.422.3274 • 215.699.0940 • Fax 215.699.0944 |
