| MECHANICAL TOOLING COMPONENT — SELECTION GUIDE & VISUAL INDEX |
| Vlier Brand Tooling Components |
| Torque Thumb Screws |
Summary Description |
BPG Catalog Links |
 |
Torque Thumb Screws provide a variety of holding support including regular, reverse, variable and off-angle. Styles include: Regular, Swivel Pad, Inverted, Tee-Head and Adjustable. Checknut provided to prevent back-off during operation. |
Torque Thumb Screws
|
| Adjustable Torque Handles |
Summary Description |
BPG Catalog Links |
 |
Adjustable Torque Handles offer control of forward force on assemblies, machinery, etc. where ordinary torque thumb screws would require considerable machining or customizing. Four (4) models of Vlier Adjustable Torque Handles. |
Adjustable Torque Handles
|
| Spring Stops |
Summary Description |
BPG Catalog Links |
 |
Spring Stops provide accurate, controlled end forces where fixture walls are not available. Steel and Delrin Nose designs. Die cast aluminum and steel body designs. Four (4) nose design options. |
Spring Stops
|
| Toggle Pads |
Summary Description |
BPG Catalog Links |
 |
Steel/Stainless Steel or SS-Delrin Pad Toggle Pads solidly clamp parts with uneven or off-angle surfaces. Self-aligning and self-leveling with a 15° angle of movement from center for pad seating against workpiece surface with applied force. Eliminates clamp slippage. Delrin pads avoid damage to soft metals, polished surfaces or other finishes. Stainless steel models offer extra protection against rust and corrosion. |
Toggle Pads
|
| Swivel Pad Clamps |
Summary Description |
BPG Catalog Links |
 |
Knurled Head Model Swivel Pad Clamps offer finger-tight clamping with an easy to grip knurled head. Holds parts with off-angle surfaces without marring or damaging the surfaces. Hardened bearing surface absorbs screw torque. Socket Set Model Swivel Pad Clamps with steel, steel and delrin, stainless steel, and stainless steel & delrin bodies and swivel pads offer maximum support and rigidity. Ideal in limited spaces, pads hold parts with off-angle surfaces without surface marring or damage. |
Knurled Head Models
Socket Set Models
|
| Stock Crowders |
Summary Description |
BPG Catalog Links |
 |
Stock Crowders provide positive alignment of stock in dies and fixtures. Saves pilots, easy to remove for die sharpening. Handles stock as thin as .010 and width variations up to 1/16. |
Stock Crowder
|
| Fixture Studs |
Summary Description |
BPG Catalog Links |
 |
Vlier Fixture Studs offer tensile strength of 125,000 min. PSI. Brinell : 225. Yield: 100,000 min. PSI. Elongation: 10% in 2. Machinability is 80% of B-1112. Rockwell: 25C. |
Fixture Studs
|
| Nuts |
Summary Description |
BPG Catalog Links |
 |
Vlier T-Slot Nuts are made to fit all standard machine tables. Incomplete thread at bottom prevents stud from passing through and into the machine table. Case hardened for abrasion resistance with black oxide finish.
|
T-Slot Nuts
|
