LOW PROFILE MOUNTS: Multiaxis Mount Series

Low-profile, economical mounts provide low-frequency vibration isolation in all directions
Barry Controls Multiaxis Mounts are designed for low-frequency vibration isolation. These all-attitude isolators provide effective vibration protection in all directions and are available in either square or diamond configurations. Snubbing washers provide an interlocking system of metal fasteners which act to prevent damage from overload or excessive shock impact.

Natural Frequency	7 Hertz Under max. Load (6550)
Transmissibility at Resonance	10.0
Resilient Element	Neoprene
Standard Materials	Colled-rolled steel
Weight	1 oz. (27481-S or 27481-D)
Mounting Hardware

Dimensions and Performance Characteristics
27481-XS \| 27481-XD

Applications

Oxygen Concentrators
Small Pumps
Electronic Equipment
Medical Equipment
Instruments
Compressors

Features

All attitude
Low-cost
Compression to shear stiffness ratio 2:1
Axial to radial stiffness of 1:1
Compact, low-profile design
Available in square or diamond shape

Benefits

Provides low-frequency vibration isolation in all directions
Compact size minimizes required mounting space
Designed for a wide range of applications
Easy to install

Load Range

Load Ratings from 1 to 16 lbs. per isolator at 3/16" deflection

Environmental Data

Hi-Damp Silicone Version meets shock & vibration requirements of MIL-E-5400 with an operating temperature range of -67ºF to +300ºF (-55ºC to +150ºC).
Neoprene version is available for use where temperature extremes are not encountered, but resistance to oil or ozone is required. Operational temperature range is -20ºF to +180ºF (-30ºC to +83ºC).

440 Industrial Drive • North Wales, PA 19454-4151 • 800.422.3274 • 215.699.0940 • Fax 215.699.0944