Metric Steel & Stainless Steel Hexnose Hi-Life Posi Hex Long Travel
ALL PRODUCT INDEX
Steel Body Phenolic and Delrin Nose Plungers
Vlier Steel body Phenolic nose and Delrin nose plungers and
Stainless Steel body Delrin nose plungers are ideal for use with
aluminum, brass or any soft, easily marred material.
| Standard Plungers - Steel Phenolic/Delrin Nose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | |||
| Phenolic Nose | Delrin Nose | Init. | Mid. | Final | ||||
| NS50 | NNS50 | 2.7 | 5.0 | 7.3 | 8-32 | 5/8 | 3/32 | .068-.070 |
| NS52 | NNS52 | 2.9 | 7.0 | 11.1 | 10-32 | 3/4 | 1/8 | .090-.092 |
| NS54 | NNS54 | 3.0 | 8.0 | 13.0 | 1/4-20 | 1 | 3/16 | .116-.118 |
| NS54A | NNS54A | 3.0 | 8.0 | 13.0 | 1/4-28 | 1 | 3/16 | .116-.118 |
| NS56 | NNS56 | 3.0 | 9.0 | 15.0 | 5/16-18 | 1 | 3/16 | .133-.135 |
| NS58 | NNS58 | 5.5 | 10.0 | 14.5 | 3/8-16 | 1-1/8 | 3/16 | .185-.187 |
| NS60 | NNS60 | 6.6 | 12.0 | 17.4 | 1/2-13 | 1-1/4 | 1/4 | .246-.248 |
| NS62 | NNS62 | 10.5 | 18.0 | 25.5 | 5/8-11 | 1-1/2 | 5/16 | .308-.310 |
| Standard Plungers - Steel Phenolic Nose/Delrin Nose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | |||
| Phenolic Nose | Delrin Nose | Init. | Mid. | Final | ||||
| NS51 | NNS51 | 0.7 | 1.5 | 2.3 | 8-32 | 5/8 | 3/32 | .068-.070 |
| NS523 | NNS53 | 1.3 | 2.0 | 2.7 | 10-32 | 3/4 | 1/8 | .090-.092 |
| NS55 | NNS55 | 1.0 | 2.5 | 4.0 | 1/4-20 | 1 | 3/16 | .116-.118 |
| NS55A | NNS55A | 1.0 | 2.5 | 4.0 | 1/4-28 | 1 | 3/16 | .116-.118 |
| NS57 | NNS57 | 1.5 | 3.0 | 4.5 | 5/16-18 | 1 | 3/16 | .133-.135 |
| NS59 | NNS59 | 2.8 | 5.0 | 7.2 | 3/8-16 | 1-1/8 | 3/16 | .185-.187 |
| NS61 | NNS61 | 2.7 | 6.0 | 9.3 | 1/2-13 | 1-1/4 | 1/4 | .246-.248 |
| NS63 | NNS63 | 3.5 | 7.0 | 10.5 | 5/8-11 | 1-1/2 | 5/16 | .308-.310 |
| Standard Plungers - Stainless Steel/Delrin Nose | |||||||
|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | ||
| Init. | Mid. | Final | |||||
| SSSD50 | 2.7 | 5.0 | 7.3 | 8-32 | 5/8 | 3/32 | .068-.070 |
| SSSD52 | 2.9 | 7.0 | 11.1 | 10-32 | 3/4 | 1/8 | .090-.092 |
| SSSD54 | 3.0 | 8.0 | 13.0 | 1/4-20 | 1 | 3/16 | .116-.118 |
| SSSD54A | 3.0 | 8.0 | 13.0 | 1/4-28 | 1 | 3/16 | .116-.118 |
| SSSD54B | 2.0 | 5.5 | 9.0 | 1/4-20 | 3/4 | 1/8 | .116-.118 |
| SSSD56 | 3.0 | 9.0 | 15.0 | 5/16-18 | 1 | 3/16 | .133-.135 |
| SSSD58 | 5.5 | 120.0 | 14.5 | 3/8-16 | 1-1/8 | 3/16 | .186-.187 |
| SSSD60 | 6.6 | 12.0 | 17.4 | 7/2-13 | 1-1/4 | 1/4 | .247-.248 |
| SSSD62 | 10.5 | 18.0 | 25.5 | 5/8-11 | 1-1/2 | 5/16 | .308-.310 |
| Standard Plungers - Stainless Steel/Delrin Nose | |||||||
|---|---|---|---|---|---|---|---|
| Part No. | End Force, Lbs. | A | B | C | D | ||
| Init. | Mid. | Final | |||||
| SSSD51 | 0.7 | 1.5 | 2.3 | 8-32 | 5/8 | 3/32 | .069-.070 |
| SSSD53 | 1.3 | 2.0 | 2.7 | 10-32 | 3/4 | 1/8 | .091-.092 |
| SSSD55 | 1.0 | 2.5 | 4.0 | 1/4-20 | 1 | 3/16 | .117-.118 |
| SSSD55A | 1.0 | 2.5 | 4.0 | 1/4-28 | 1 | 3/16 | .117-.118 |
| SSSD57 | 1.5 | 3.0 | 4.5 | 5/16-18 | 1 | 3/16 | .133-.135 |
| SSSD59 | 2.8 | 5.0 | 7.2 | 3/8-16 | 1-1/8 | 3/16 | .185-.187 |
| SSSD61 | 2.7 | 6.0 | 9.3 | 1/2-13 | 1-1/4 | 1/4 | .246-.248 |
| SSSD63 | 3.5 | 7.0 | 10.5 | 5/8-11 | 1-1/42 | 5/16 | .308-.310 |
| Delrin is a registered trademark of Dupont Corporation. | |||||||
| 440 Industrial Drive • North Wales, PA 19454-4151 Call 1.800.422.3274 • Fax 1.215.699.0944 |
