ALL ELASTOMER MOUNTS: W Series Ring & Bushing Mounts

all elastomer mounts, w series rign & bushing mounts

Versatile, low cost elastomeric isolators protect against shock, vibration and reduce structure borne noise.
Barry Ring & Bushing isolators consist of an elastomeric ring and elastomeric bushing and are designed to be built directly into the structural components of the equipment to be mounted. Any number of these isolators can be installed in parallel for greater load capacity and may be stacked in series when greater deflection capacity is required.

Natural Frequency	See Tables
Transmissibility at Resonance	10:1
Resilient Element	Natural Rubber
Standard Materials	None
Weight	WB6 = 3.37 oz. (All other WR/WB parts weigh less than 1.0 oz.)
Installation

Dimensions and Performance Characteristics
WR-1/WB-1 \| WR-3/WB-3 \| WR-4/WB-4 \| WR-6/WB-6

Applications

Office machines
Motors
Fans & blowers
HVAC equipment
Electronics equipment
Telecommunications equipment

Features

Can be installed in parallel or series for greater load capacity
Ribbed protrusions act as load bearing members
Available in four stiffnesses (-030, -040, -050 and -060)
Designed for base mounting

Benefits

Highly efficient noise reduction
Absorb vibration and shock perpendicular to mounting axis
WB4 bushings have radial fingers on one surface only to act as rebound (shock absorbing) members

Load Range

WR1/WB1 = 4 load ratings to 12 lbs. per isolator
WR3/WB3 = 4 load ratings to 35 lbs. per isolator
WR4/WB4 = 4 load ratings to 75 lbs. per isolator
WR6/WB6 = 4 load ratings to 350 lbs. per isolator

Environmental Data

Natural rubber elastomer is compatible with most industrial and commercial environments and has an operating temperature range of -40ºF to +180ºF (-40ºC to +83ºC).
Special materials are available upon special order.

440 Industrial Drive • North Wales, PA 19454-4151 • 800.422.3274 • 215.699.0940 • Fax 215.699.0944